Start-Up Kit with flexible, precut capillaries for analytical UHPLC and ULDC systems with 1/16" connections

Set of precut capillaries, fittings, connectors and adapters

The MarvelXACT^TM connection system is recommended for all connections in a standard AZURA Analytical system. It incorporates flexible 1/32” OD tubing to easily route through your system. The fitting is already installed on each capillary. It is compatible with KNAUER standard 1/16” receiving ports and is absolutely finger-tight so that no tools are required. Additionally, these fittings auto-adjust to various port depths and do not depend on ferrules. They seal at the bottom of the port, without complex techniques, which significantly reduces required torque.

The trouble-free connection system eliminates the risk of under- and over-tightening, with a patented torque-limiting mechanism. This unique feature provides a haptic “click” feedback when it reaches the optimum torque, assuring a perfect connection. These capillaries can be connected and disconnected more than 100 times.

The AZURA Analytical Trouble-free StartUp Kit contains:

1 capillary 600 mm length, 0.254 mm ID incl. fittings for connection of pump and autosampler
1 capillary 500 mm length, 0.075 mm ID incl. fittings for connection autosampler and column (for columns up to 150 mm length)
1 capillary 350 mm length, 0.075 mm ID incl. fittings for connection of column and detector
1 capillary 900 mm length, 0.18 mm ID incl. fittings for connection of pump and autosampler for all systems with 2 AZURA L detectors or benchtop installation

1 Connector UNF 10/32 - UNF 10/32 stainless steel
5 adapters for AZURA L-devices capillary guidance

Key Features

Made in Germany

Certified quality management

Customized solutions

60 years experience

Material	Stainless Steel
Type	Start-up kit
Thread	UNF 10-32
Capillary connection	1/16"

Material

Stainless Steel

Type

Start-up kit

Thread

UNF 10-32

Capillary connection

1/16"

Accessories & Spare Parts

Flexible, precut and trouble-free AZURA Analytical SST capillary for 1/16", stainless steel, 0.254 mm ID, 600 mm length, incl. Fingertight fittings

Stainless steel, 0.254 mm ID, 600 mm length, connect pump - autosampler for all AZURA Analytical systems

Article No.: AZF125

Show product

Flexible, precut and trouble-free AZURA Analytical PEEK-Lined SST capillary for 1/16", 0.075 mm ID, 500 mm length, bioinert, incl. Fingertight fittings

PEEK-lined Stainless steel, 0.075 mm ID, 500 mm length

Article No.: AZF05

Show product

Flexible, precut and trouble-free AZURA Analytical PEEK-Lined SST capillary for 1/16", 0.075 mm ID, 350 mm length, bioinert, incl. Fingertight fittings

PEEK-lined Stainless steel, 0.075 mm ID, 350 mm length

Article No.: AZF05-1

Show product

Flexible, precut capillary for HPLC (900 mm, 0.18 mm ID with 1/16" connections)

Stainless steel, 0.18 mm ID, 900 mm length

Article No.: AZF55-1

Show product

Capillary adapter to use with AZURA capillary guide

for 1/16" and 1/32" inch capillaries, 5 pcs.

Article No.: A2543

Show product

Coupling to connect 2 capillaries with 1/16'' OD, suitable for classical HPLC

Coupling to connect 2 capillaries with 1/16'' OD (material: stainless steel, thread: 10-32 UNF), including 2 bushings and ferrules, 0.5 mm bore, suitable for classical HPLC, 1 set

Article No.: A0117

Show product

Certified Quality

KNAUER is known for the quality of its products and has been certified several times. We produce high-tech laboratory instruments for research, routine analysis and production.
See all Quality certificates

In addition, we have extended documentation about all our products, including CE Declarations of Conformity.
See all CE Declarations of conformity

Innovation and quality - since 1962. Made in Germany.