The Ethernet Eventbox offers interfaces for 12 digital inputs and outputs each. These can be used to control the events of the KNAUER devices via the pin header on the back of the device housing or to process sensor signals such as from air sensors. The incoming and outgoing signals can be controlled and programmed only via the PurityChrom (version higher than 5.9.135) and PurityChrom MCC Plus (version 5.10.014 and higher).
The scope of delivery includes a power cable and a network cable. To integrate the signals, you will also need the following connection cables, depending on the desired use:
Please be aware that the Ethernet Eventbox only supports the following signals:
Ethernet Eventbox - Front View
Ethernet Eventbox - Rear View
Examples of use
Circuit Diagram Input
Circuit Diagram Output
Made in Germany
Certified quality management
Customized solutions
60 years experience
| Analog inputs | None |
|---|---|
| Analog outputs | None |
| Digital inputs | 12 (M8 sockets, SAL-8, 3-pole) |
| Digital outputs | 12 (hollow sockets, AD 5,5 mm , ID 2,5 mm, max. Switching capacity: 60 V/DC, 125 V/AC, 1 A) |
| Power supply | power supply cable included |
|---|---|
| Dimensions | 11,5 cm x 30 cm x 20 cm (Height x width x depth) |
| Weight | 2.8 kg |
Input Cable for Ethernet Eventbox (5m, M3 plug, open ends with wire end ferrules)
Article No.: AZB01-01
Show product
Output Cable for Ethernet Eventbox (3m, hollow plug, open ends with wire end ferrules)
Article No.: AZB01-02
Show product
Cable for connection of an air sensor to an Ethernet Eventbox (2m, 2-pole and 3-pole plug)
Article No.: AZB01-03
Show product
Basic License for one system
Article No.: A2650
Show product
Extends the Basic License to an unlimited number of controllable devices and 8 data channels, adds autosampler and stacked injections support
Article No.: A2652
Show product
Option for a diode-array detector (DAD)
Article No.: A2654
Show product
Mass spectrometry (MS) option for supporting the mass spectrometer 4000 MiD®
Article No.: A2655
Show product
user-friendly & 21 CFR part 11 compliant
Article No.: A2657
Show product
KNAUER is known for the quality of its products and has been certified several times. We produce high-tech laboratory instruments for research, routine analysis and production.
See all Quality certificates
In addition, we have extended documentation about all our products, including CE Declarations of Conformity.
See all CE Declarations of conformity
Innovation and quality - since 1962. Made in Germany.
Call us or drop us a line.
Mo – Fr
07:00 – 17:00 CE(S)T
24 / 7
Technical data or prices are subject to change without notice. Prices may vary by country and do not include taxes, customs duties or delivery. All trademarks are the property of their respective owners.Our general terms and conditions apply: www.knauer.net/terms
