Preparative version for sample volumes up to 10 ml with biocompatible flow path.
Autosampler 3950
High precision injection
Low carry-over due to efficient needle wash
Supports three injection modes: full loop, partial loop filling, and µl pickup
Headspace pressure function prevents bubbles at sample uptake
| Sample capacity | 24 vials, 10 ml each (LSV) |
|---|---|
| Vial/plate dimensions | max. plate/vial height: 47 mm (incl. septa or capmat) |
| Injection volume range | 1–10000 µl programmable |
| Sample loop | 10 ml |
| Dispenser syringe | 2500 µl |
| Headspace pressure | built-in compressor, only for vials with septum |
| Switching time inj. valve | < 100 ms |
| Piercing needle precision | ± 0.6 mm |
| Sample tray cooling | 4-20°C |
| Vial detection | missing vial/well plate detection by sensor |
| Needle wash | programmable: wash between injections and wash between vials |
| Wetted materials | PEEK,Tefzel®, Vespel®, glass, Teflon®. |
| Injection modes | partial loopfill |
|---|---|
| Injection volumes | 1–5000 µl, 1 µl increments |
| Sample carryover | RSD ≤ 1.0 % for partial loopfill injections, injection volumes > 10 µl up to 50 % of the installed sample loop |
| Injections per vial | max. 9 injections |
| Analysis time | max. 9 h, 59 min, 59 s |
| Inputs | 2 programmable TTL inputs (next injection, freeze, stop) |
|---|---|
| Outputs | 1 programmable relay output (inject marker, auxiliary, alarm) |
| Control | Ethernet (LAN) |
| Ambient conditions | temperature range: 4–40 °C; 39.2–104 °F air humidity: below 90 % humidity (non condensing) |
|---|
| Power supply | 90–230 V AC ± 10 %; 50–60 Hz; 200 VA |
|---|---|
| Dimensions | 300 x 360 x 510 mm (W x H x D) |
| Weight | 21 kg |
Vials: Crimp neck vials N20 (ø 22 mm), 10 ml, clear glass Caps: Cap PE transparent, N20 for flat crimp neck, center hole, Septa: Natural rubber red-orange/TEF, 1000 pcs. each
Article No.: A1585
Show product
analytical HPLC autosampler with sample cooling
Article No.: A50051-1
Show product
analytical HPLC autosampler with biocompatible flow path
Article No.: A50052-1
Show product
analytical HPLC autosampler with biocompatible flow path and sample cooling
Article No.: A50053-1
Show product
preparative HPLC autosampler with sample cooling
Article No.: A50056-1
Show product
KNAUER is known for the quality of its products and has been certified several times. We produce high-tech laboratory instruments for research, routine analysis and production.
See all Quality certificates
In addition, we have extended documentation about all our products, including CE Declarations of Conformity.
See all CE Declarations of conformity
Innovation and quality - since 1962. Made in Germany.
Call us or drop us a line.
Mo – Fr
07:00 – 17:00 CE(S)T
24 / 7
Technical data or prices are subject to change without notice. Prices may vary by country and do not include taxes, customs duties or delivery. All trademarks are the property of their respective owners.Our general terms and conditions apply: www.knauer.net/terms
