The Hastelloy® C pump head shows good resistance to a variety of corrosive media including strong oxidants and hot media, such as sulfuric acid, nitric acid, phosphoric acid, formic acid and acetic acid. This pump head can be used for AZURA Pump P 2.1S. Accessories included.
Pump head, 50 ml, Hastelloy C
| Pump head | 50 ml Hastelloy® C |
|---|---|
| Max. flow rate | 50 ml/min |
| Maximum delivery pressure | 300 bar (30 MPa) up to 10 ml/min, 200 bar (20 MPa) at 50 ml/min |
| Pump head materials | Hastelloy® C |
| Wetted materials | Hastelloy® C, graphite fiber reinforced PTFE, FFKM, Kel-F, ruby, sapphire, zirconium oxide (ZrO₂) |
| Capillary connection | Inlet: 1/4"-28 UNF (flat bottom) / Outlet: 10–32 UNF (coned) |
Maintenance kit for pump head 50ml - AHC23 - including all wear parts: check valves, piston rods, gaskets, O-rings, backing rings, compression springs
Article No.: ARH35
Show product
KNAUER is known for the quality of its products and has been certified several times. We produce high-tech laboratory instruments for research, routine analysis and production.
See all Quality certificates
In addition, we have extended documentation about all our products, including CE Declarations of Conformity.
See all CE Declarations of conformity
Innovation and quality - since 1962. Made in Germany.
Call us or drop us a line.
Mo – Fr
07:00 – 17:00 CE(S)T
24 / 7
Technical data or prices are subject to change without notice. Prices may vary by country and do not include taxes, customs duties or delivery. All trademarks are the property of their respective owners.Our general terms and conditions apply: www.knauer.net/terms
