KNAUER’s new Liquid Handler LH 2.1 allows for the expansion of purification processes with the ability to combine sample injection and fraction collection in one device. A high capacity of sample and fraction vessels meets a flexible arrangement facilitating reinjection of samples to reach new levels of purification. The handler injects samples with minimal loss regardless of their volume – perfect for working with expensive compounds.
• Combine sample injection and fraction collection
• Inject small and large sample volumes with minimal loss
• Expand your vessel capacities
• Flexible arrangement of samples and fractions
• Reinject collected fractions to reach new levels of purity
KNAUER Liquid Handler LH 2.1
KNAUER Liquid Handler LH 2.1
Flow chart of Liquid Handler LH 2.1
Close up interior of Liquid Handler LH 2.1
Close up rack positioning
Close up fraction collection outlet
| Fraction capacity | Maximum vessel capacity with 5 KNAUER racks
|
|---|---|
| Diverter valve | Yes |
| Number of racks | 5 KNAUER racks, teaching module for own racks (racks are not included) |
| Sample injection | standard and sandwich injection mode |
|---|---|
| Sample loop | up to 60 ml; included 10 mL (PEEK) |
| Injection valve | valve and valve drive not included, 1/16" or 1/8" V 4.1 injection valves (coned port) and VU 4.1 supported |
| Temperature control | No |
| Needle wash | single needle wash step after each injection |
| Wash solvent | 4 |
| Wetted materials | Aluminium oxide 99.5 %, Borosilicate Glass, PTFE, FEP, AISI 316L, PEEK |
| Power supply | 100–240 V, 50–60 Hz |
|---|---|
| Dimensions | 96 cm x 104 cm x 70 cm; working area 70 cm x 30 cm |
| Weight | 82 kg |
| Leak sensor | No |
| Ambient conditions | 10–35°C, 30–80% RH, non-condensing |
| Note | valve drive VU 4.1, injection valve V 4.1 and racks are not included; not CSA/UL certified |
| Control | LAN, supported by PurityChrom and Chromeleon 7.2 |
|---|---|
| Programming | Loop Volume, Syringe Volume, Syringe Speed, Syringe Delay, Sandwich Volume, Wash Volume, Wash Speed, Dead Volume |
LH 2.1 Rack for 3x microtiter plates
Article No.: A50801
Show product
LH 2.1 Rack for 162x 2 ml tubes (Eppendorf)
Article No.: A50802
Show product
LH 2.1 Rack for 98x 15 ml tubes (Falcon)
Article No.: A50803
Show product
LH 2.1 Rack for 32x 50 ml tubes (Falcon)
Article No.: A50804
Show product
LH 2.1 Rack fixation
Article No.: A50806
Show product
Tubing for tip, ID 1,5 mm, 180" 457 cm, FEP - Liquid Handler LH 2.1
Article No.: A50807
Show product
Tubing for washing solution, ID 2 mm, 70 " 177 cm, FEP - Liquid Handler LH 2.1
Article No.: A50808
Show product
Tip/ Injection needle - Liquid Handler LH 2.1
Article No.: A50810
Show product
Dispenser syringe 12,5 ml - Liquid Handler LH 2.1
Article No.: A50809
Show product
Dispenser syringe 5 ml - Liquid Handler LH 2.1
Article No.: A50811
Show product
Dispenser syringe 2,5 ml - Liquid Handler LH 2.1
Article No.: A50812
Show product
Dispenser syringe 1 ml - Liquid Handler LH 2.1
Article No.: A50813
Show product
Buffer tubing, ID 2.1 mm, AD 1/8", 600 cm, 21 mL, FEP - Liquid Handler LH 2.1
Article No.: A50814
Show product
Wash Station for Liquid Handler LH 2.1
Article No.: A50815
Show product
KNAUER is known for the quality of its products and has been certified several times. We produce high-tech laboratory instruments for research, routine analysis and production.
See all Quality certificates
In addition, we have extended documentation about all our products, including CE Declarations of Conformity.
See all CE Declarations of conformity
Innovation and quality - since 1962. Made in Germany.
We are happy to help you
Mo – Fr
07:00 – 17:00 CE(S)T
24 / 7
Technical data or prices are subject to change without notice. Prices may vary by country and do not include taxes, customs duties or delivery. All trademarks are the property of their respective owners.Our general terms and conditions apply: www.knauer.net/terms
