Replaced by APK20FA
With its small footprint, the compact dual piston pump AZURA P2.1S can be used for a wide range of laboratory tasks. A pressure rating of up to 400 bar and chemical resistance to a wide range of eluents make it the perfect choice for LC and dosing applications. Pump heads with maximum flow rates of 10 and 50 ml/min are available.
Moreover, its exchangeable pump head allows adaptation of the pump for delivery of aggressive media and bioinert applications. The pump head can be heated or cooled with optional accessories.
AZURA P 4.1S pump with pressure sensor and ceramic pump head
| Max. flow rate | 50 ml/min |
|---|---|
| Flow rate range | 0.01−50 ml/min |
| Flow rate increment | 0.01 |
| Pressure range | |
| Maximum delivery pressure [psi] | 2180 psi |
| Maximum delivery pressure [MPa] | 15 MPa |
| Maximum delivery pressure [bar] | 150 bar |
| Pump head materials | Stainless Steel |
| Maximum viscosity | 100 cp |
| Liquid temperature range | 4−60 °C (39.2−140 °F) |
| Gradient | Isocratic |
| Leak management | No |
| Wetted materials | aluminum oxide (Al2O3), FEP, FKM, GFP (graphite fiber reinforced PTFE), PEEK, PTFE, ruby, sapphire, stainless steel, Tefzel® (ETFC), Zirconium oxide |
| Pump features | Piston seal wash, Integrated pressure sensor, Purge valve (manual), Standalone control and programming |
| Note | Pressure sensor membrane made of stainless steel; limited wetting in fluidic path |
| Best working conditions | 1.0−40.0 ml/min |
|---|---|
| Continuous working conditions | 3−25 ml/min |
| Flow rate accuracy | ±2% |
| Flow rate accuracy conditions | 5 - 50% of flow range using ethanol/water 10:90 |
| Flow rate precision | ≤ 0.5 % RSD |
| Flow rate precision conditions | measured at 1 ml/min using ethanol/water 10:90 |
| Pump type | Ultra-compact high pressure pump |
| Pulsation compensation | No |
| Active piston seal wash | No |
| Piston seal washing | Yes |
| System protection |
|
| Pump Outlet thread | Female UNF 10-32 (coned) |
| Pump head inlet (standard) | 1/4"-28 UNF (flat bottom) |
| Pump head outlet (standard) | 10−32 UNF (coned) |
| Interfaces | display |
|---|---|
| Control | RS-232; analog; button on device |
| Analog inputs | 0−10V |
| Power supply | 100−240 V; 50−60 Hz |
|---|---|
| Dimensions | 121 x 129 x 220 mm |
| Weight | 2.3 kg |
| Leak sensor | No |
| Ambient conditions | temperature range: 10–40 °C; 50–104 °F air humidity: below 90 % humidity (non condensing) |
Pump head 10 ml, stainless steel, 400-700 bar
Article No.: AHB40
Show product
included in shipkit
Article No.: FPGA
Show product
Cable kit for AZURA P 2.1S, P 4.1S, and UVD 2.1S included in shipkit
Article No.: FZA01
Show product
Pump head cooling and heating device for 10 and 50 ml/min pump heads
Article No.: A2035-1
Show product
Maintenance kit for pump P2.1S, P4.1S, 40P - including all wear parts: tooth belt, silicon tube
Article No.: ARP10
Show product
Assistant module P 4.1S, 50 ml, stainless steel
Article No.: APG22FA
Show product
Assistant module P 4.1S, 50 bar, 50 ml, stainless steel
Article No.: APG12FA
Show product
KNAUER is known for the quality of its products and has been certified several times. We produce high-tech laboratory instruments for research, routine analysis and production.
See all Quality certificates
In addition, we have extended documentation about all our products, including CE Declarations of Conformity.
See all CE Declarations of conformity
Innovation and quality - since 1962. Made in Germany.
We are happy to help you
Mo – Fr
07:00 – 17:00 CE(S)T
24 / 7
Technical data or prices are subject to change without notice. Prices may vary by country and do not include taxes, customs duties or delivery. All trademarks are the property of their respective owners.Our general terms and conditions apply: www.knauer.net/terms
