The purification of natural products can be achieved by various techniques, including preparative single- and multi-column liquid chromatography. However, the development of efficient, fast and cost-effective methods for the purification of natural products from real samples remains a difficult and challenging task due to the complexity of the matrix. In contrast to conventional purification methods such as distillation, preparative chromatography uses less energy, consumes less water and chemicals while achieving higher yields [1]. In this application, a batch process for the purification of CBD (cannabidiol) from a CBD-rich cannabis extract was developed and optimized. Using the batch process, approximately 137 mg of CBD with a recovery of 95 % and a purity of 97 % was obtained from a 4 ml extract.
System setup of preparative HPLC system
Overlay chromatograms of three preparative measurements with premixed eluents
Overlay chromatogram of preparative overload tests
Chromatogram section of preparative fractionation over CBD peak
| Method | Preperative HPLC |
|---|---|
| Mode | RP |
| Substances | Cannabidiol (CBD), Cannabichromene (CBC), Tetrahydrocannabinol (THC) |
| Key words | HPLC, preparative chromatography, RP, purification of natural products, method development, scale up, CBD, CBC, THC |
| CAS number | 13956-29-1, 20675-51-8, 1972-08-3 |
| Version | Version 01 / 11.07.2024 |
AZURA® Eluent tray E 2.1L for AZURA® devices with a capacity of 6 x 1 l bottles or 4 x 2.5 l bottles or 2 x 5 l bottles, (delivery without bottles)
Article No.: AZC00
Show product
Left module: UV detector UVD 2.1S - EDA03XA Middle module: Valve drive VU 4.1 - EWA04 Right module: Pump P 4.1S, 10 ml, stainless steel - DPG22EA
Article No.: AY01429
Show product
Assistant module UVD 2.1S without flow cell
Article No.: EDA03XA
Show product
Assistant module VU 4.1 for valves V 4.1
Article No.: EWA04
Show product
Assistant module P 4.1S, 10 ml, stainless steel
Article No.: DPG22EA
Show product
3 mm path length, 2 µl, 1/16", 300 bar, stainless steel, fiber optic connectors, classical KNAUER flow cell
Article No.: A4044
Show product
DLC stainless steel multi-injection valve for more sophisticated separation tasks. (1/16", 500 bar, 0.75 mm bore size)
Article No.: AVN96AE
Show product
Pump head 10 ml, stainless steel, 400-700 bar
Article No.: AHB40
Show product
AZURA® Pump P 2.1L with 250 ml pump head (stainless steel)
Article No.: APE20LA
Show product
LPG module for Pump P 2.1L ternary up to 220 ml/min (stainless steel)
Article No.: AZZ00AB
Show product
Preparative Column
Article No.: 25JE181E2Q
Show product
Fraction collector Foxy® R1 for 1/16“ or 1/8“ tubing
Article No.: A59100
Show product
Dynamic mixing chamber (250 V), titanium, preparative, 1/8“, up to 250 bar, 5.9 ml mixing volume
Article No.: A70581
Show product
Full license for one system
Article No.: A2681
Show productWe are happy to help you