Pressure decrease after the column can lead to formation of air bubbles in the detector flow cell resulting in baseline noise and drift. The backpressure regulator provides a quick and convenient way to improve the stability of detector baseline by providing a constant back-pressure on the flow cell, which stops the release of dissolved gases from the mobile phase. The backpressure regulator is made of stainless steel with a low dead volume. A spring-loaded diaphragm provides the force that generates the back-pressure. Spring tension may be adjusted to vary the back-pressure without disconnecting any lines. The pressure is adjustable between 90-300 bar with pessure resistance up to 300 bar.
| Type | Back-pressure regulator |
|---|
| Material | Stainless steel, Polyimide |
|---|
Spare membranes for Backpressure Regulators A70084, A70087, A70088
Article No.: A70082
Show product
KNAUER is known for the quality of its products and has been certified several times. We produce high-tech laboratory instruments for research, routine analysis and production.
See all Quality certificates
In addition, we have extended documentation about all our products, including CE Declarations of Conformity.
See all CE Declarations of conformity
Innovation and quality - since 1962. Made in Germany.
Call us or drop us a line.
Mo – Fr
07:00 – 17:00 CE(S)T
24 / 7
Technical data or prices are subject to change without notice. Prices may vary by country and do not include taxes, customs duties or delivery. All trademarks are the property of their respective owners.Our general terms and conditions apply: www.knauer.net/terms
