The AZURA pH sensor is an optional accessory that can be connected to the pH2.1S conductivity monitor. It comes with a pH electrode with BNC connector, a pH flow cell with integrated bypass, and flat-bottom fittings to connect the pH flow cell to either 1/16" or 1/8" OD tubing.
Several options are available to physically integrate the sensor into your AZURA system to minimize system volume. Choose from the AZURA Mounting Bracket Bio, the AZURA Organizer, or the AZURA Click System (ordered separately).
Order the pH electrode dummy separately if your application requires frequent removal of the pH electrode.
The recommended maximum flow rate is 100 ml/min, however the pH sensor tolerates higher flow rates. the limiting factor is the maximum pressure of the pH electrode (5 bar). The delay volume of the flow cell with inserted electrode is approx. 80 µl.
AZURA pH sensor (flow cell incl. electrode)
AZURA pH flow cell with inserted optional AZURA pH dummy electrode
AZURA pH sensor mounted onto AZURA Mounting Bracket Bio A9854-1
AZURA pH sensor mounted onto AZURA Click A70089
AZURA pH sensor mounted onto AZURA Organizer A70085
Made in Germany
Certified quality management
Customized solutions
60 years experience
| Body material | PEEK |
|---|---|
| Biocompatible | Yes |
| Connection of flow cell | 1/4-28" UNF flat-bottom |
| Capillary connection | 1/16", 1/8" |
| Wetted materials | PEEK, FFKM, glass |
| Flow cell volume | ~ 80 µl (with inserted eclectrode or dummy electrode) |
| Max. flow rate | 100 ml/min |
| Maximum pressure | 5 bar |
| Back pressure | < 0.1 bar at 100 ml/min, ~ 0.5 bar at 250 ml/min (water, RT) |
| Note | Higher flow rates at expense of pressure buildup |
for AZURA pH flow cell
Article No.: A1942-1
Show product
pH electrode for AZURA pH sensor & CM 2.1S respectively
Article No.: A1933-1
Show product
part of AZURA pH sensor (100 ml/min)
Article No.: A1943
Show product
Mounting bracket AZURA® L Bio for manual KNAUER injection valve, pH-flowcell and a prepacked column
Article No.: A9854-1
Show product
AZURA Organizer for attachment of columns and FPLC accessoires to an AZURA device or system
Article No.: A70085
Show product
AZURA Click rail to attach IFU 2.1 LAN, air sensors, pressure sensors, pH flow cells, or the AZURA® Organizer to AZURA® L devices
Article No.: A70089
Show product
O-ring for AZURA pH flow cell
Article No.: A1943-1
Show product
AZURA CM 2.1S with flow cell - up to 10 ml/min - conductivity monitor with optional pH measurement
Article No.: ADG30GC
Show product
AZURA CM 2.1S with flow cell - up to 100 ml/min - conductivity monitor with optional pH measurement
Article No.: ADG30GD
Show product
for pH monitor pH 2.1S and conductivity monitor CM 2.1S
Article No.: A70091-3
Show product
KNAUER is known for the quality of its products and has been certified several times. We produce high-tech laboratory instruments for research, routine analysis and production.
See all Quality certificates
In addition, we have extended documentation about all our products, including CE Declarations of Conformity.
See all CE Declarations of conformity
Innovation and quality - since 1962. Made in Germany.
Call us or drop us a line.
Mo – Fr
07:00 – 17:00 CE(S)T
24 / 7
Technical data or prices are subject to change without notice. Prices may vary by country and do not include taxes, customs duties or delivery. All trademarks are the property of their respective owners.Our general terms and conditions apply: www.knauer.net/terms
