With its small footprint, the compact dual piston pump AZURA P2.1S can be used for a wide range of laboratory tasks. A pressure rating of up to 400 bar and chemical resistance to a wide range of eluents make it the perfect choice for LC and dosing applications. Pump heads with maximum flow rates of 10 and 50 ml/min are available. Moreover, its exchangeable pump head allows adaptation of the pump for delivery of aggressive media and bioinert applications. The pump head can be heated or cooled with optional accessories.
Assistant module P 4.1S pump with pressure sensor
Assistant module P 4.1S pump with pressure sensor
Assistant module P 4.1S pump with pressure sensor
Sample assistant configuration with valve
| Max. flow rate | 50 ml/min |
|---|---|
| Flow rate range | 0.01−50 ml/min |
| Flow rate increment | 0.01 |
| Maximum delivery pressure [psi] | 730 psi |
| Maximum delivery pressure [MPa] | 5 MPa |
| Maximum delivery pressure [bar] | 50 bar |
| Pump head materials | Ceramic |
| Maximum viscosity | 100 cp |
| Liquid temperature range | 4−60 °C (39.2−140 °F) |
| Gradient | Isocratic |
| Leak management | via ASM 2.2L |
| Wetted materials | GFP (graphite fiber reinforced PTFE), ruby, sapphire, ceramic, aluminum oxide (Al2O3), FKM, PEEK, Zirconium oxide, Titanium |
| Note | Pressure sensor membrane made of stainless steel; limited wetting in fluidic path |
| Best working conditions | 1−40.0 ml/min |
|---|---|
| Continuous working conditions | 3−25 ml/min |
| Flow rate accuracy | ±2% |
| Flow rate accuracy conditions | 5 - 50% of flow range using ethanol/water 10:90 |
| Flow rate precision | measured at 5 ml/min using ethanol/water 10:90 |
| Flow rate precision conditions | ≤ 0.5 % RSD |
| Pump type | Compact high pressure pump |
| Pulsation compensation | No |
| Active piston seal wash | No |
| Piston seal washing | Yes |
| System protection |
|
| Pump head inlet (standard) | 1/4"-28 UNF (flat bottom) |
| Pump head outlet (standard) | 10−32 UNF (coned) |
| Interfaces | LAN connection of ASM 2.2L |
|---|---|
| Control | Software, Mobile Control, analog |
| Analog inputs | Flow rate 0−10V via ASM 2.2L |
| Power supply | via ASM 2.2L, DC 24V, 40 W |
|---|---|
| Dimensions | 112 x 132 x 253 mm (WxHxD) |
| Weight | 2.5 kg |
| Leak sensor | No |
| Ambient conditions | temperature range: 4–40 °C; 40–104 °F air humidity: below 90 % humidity (non condensing) |
| Note | Assistants with the following configuration are not permitted: 1) more than two pump modules - a high pressure gradient is not supported 2) more than one UV detector 3) without plug-in modul |
included in shipkit
Article No.: FPGA
Show product
Cable kit for AZURA P 2.1S, P 4.1S, and UVD 2.1S included in shipkit
Article No.: FZA01
Show product
Pump head cooling and heating device for 10 and 50 ml/min pump heads
Article No.: A2035-1
Show product
Assistant module P 4.1S, 50 bar, 10 ml, stainless steel
Article No.: APG12EA
Show product
Assistant module P 4.1S, 50 bar, 10 ml, ceramic
Article No.: APG12EB
Show product
Assistant module P 4.1S, 50 bar, 50 ml, stainless steel
Article No.: APG12FA
Show product
Assistant module P 4.1S, 10 ml, stainless steel
Article No.: APG22EA
Show product
Assistant module P 4.1S, 10 ml, ceramic
Article No.: APG22EB
Show product
Assistant module P 4.1S, 10 ml, stainless steel, normal phase
Article No.: APG22ED
Show product
Assistant module P 4.1S, 50 ml, stainless steel
Article No.: APG22FA
Show product
Assistant module P 4.1S, 50 ml, ceramic
Article No.: APG22FB
Show product
Assistant module P 4.1S, 50 ml, stainless steel for normal phase
Article No.: APG22FD
Show product
Assistant module P 2.1S, 10 ml, stainless steel
Article No.: APG92EA
Show product
Assistant module P 2.1S, 10 ml, ceramic
Article No.: APG92EB
Show product
Assistant module P 2.1S, 10 ml, Hastelloy® C
Article No.: APG92EC
Show product
Assistant module P 2.1S, 50 ml, stainless steel
Article No.: APG92FA
Show product
Assistant module P 2.1S, 50 ml, ceramic
Article No.: APG92FB
Show product
Assistant module P 2.1S, 50 ml, Hastelloy® C
Article No.: APG92FC
Show product
KNAUER is known for the quality of its products and has been certified several times. We produce high-tech laboratory instruments for research, routine analysis and production.
See all Quality certificates
In addition, we have extended documentation about all our products, including CE Declarations of Conformity.
See all CE Declarations of conformity
Innovation and quality - since 1962. Made in Germany.
We are happy to help you
Mo – Fr
07:00 – 17:00 CE(S)T
24 / 7
Technical data or prices are subject to change without notice. Prices may vary by country and do not include taxes, customs duties or delivery. All trademarks are the property of their respective owners.Our general terms and conditions apply: www.knauer.net/terms
