The Autosampler
AS 6.1L can inject from up to 768 positions when equipped with microtiter plates (either high or low formats) or from up to 108 standard 1.5 ml sample vials. Sample carryover is significantly minimized thanks to a highly-effective interior and exterior needle wash procedure. This autosampler is also fast and flexible: one complete sample injection cycle takes less than one minute, including needle wash. “partial loop filling” (variable volumes, e.g. for dilution series) is supported. The headspace pressure function prevents bubbles from forming in the vial during sample uptake. Precolumn derivatization is supported. Preparative version for sample volumes up to 10 ml with biocompatible flow path.
The accessory kit includes a vial plate for 30x 10 ml vials (A500507).
Precise injection with Autosampler AZURA AS 6.1L
Front view of Autosampler AZURA AS 6.1L
An example HPLC system containing the AZURA AS 6.1L
High precision injection
Low carry-over due to efficient needle wash
Supports three injection modes: full loop, partial loop filling, and µl pickup
Headspace pressure function prevents bubbles at sample uptake
| Autosampler Flow Path | Biocompatible |
|---|---|
| Maximum back pressure | 350 bar |
| Vial/plate dimensions | well plate dimensions according to ANSI SLAS 4-2004 (formerly ANSI/SBS 4-2004) max. plate/vial height: 47 mm (incl. septa or capmat) |
| Injection volume range | 0.1 µl–10 ml depending on sample loop |
| Sample loop | 10 ml |
| Dispenser syringe | 2500 µl |
| Headspace pressure | built-in compressor, only for vials with septum |
| Switching time inj. valve | < 100 ms |
| Piercing needle precision | ± 0.6 mm |
| Sample tray cooling | 4–40 °C |
| Vial detection | missing vial/well plate detection by sensor |
| Needle wash | programmable: wash between injections and wash between vials |
| Wetted materials | Tefzel® (ETFE), Glass, Teflon® (PTFE), Kel-F® (PCTFE), PEEK |
| Injection modes | partial loop filling |
|---|---|
| Injection precision | RSD (Rel. Standard Deviation): full loop injection: < 0.3 %, partial loop injection at volumes > 5 µl: < 0.5 %, microliter pickup injection at volumes > 5 µl: < 1.0 % |
| Sample carryover | < 0.1 % with needle washing |
| Injections per vial | max. 9 injections |
| Injection cycle time | minimum 7 s from the same vial, 14 s from different vials; < 60 s for > 100 µl sample injection in all injection modes, incl. 300 µl needle wash |
| Analysis time | max. 9 h, 59 min, 59 s |
| Inputs | 2 programmable TTL inputs (next injection, freeze, stop) |
|---|---|
| Outputs | 1 programmable relay output (inject marker, auxiliary, alarm) |
| Control | Ethernet (LAN) |
| Interfaces | LAN, analog |
| Ambient conditions | temperature range: 10–40 °C; 50–104 °F air humidity: 20–80 % |
|---|
| Power supply | 90–245 V AC |
|---|---|
| Dimensions | 364 x 379 x 623 mm (W x H x D) |
| Weight | 32 kg |
Accessory kit for autosampler with vials, caps, septum and pliers for opening and closing
Article No.: A0664
Show product
Maintenance kit for Autosampler AS6.1L, S3950 (biocompatible, preparative) - including all wear parts: sample needle, air needle, rotor seal, syringe, syringe valve, buffer tubing, wash position
Article No.: ARA13
Show product
AZURA® Autosampler AS 6.1L analytical HPLC autosampler, 700 bar
Article No.: AAA00AA
Show product
AZURA® Autosampler AS 6.1L analytical HPLC autosampler, 1240 bar
Article No.: AAA10AA
Show product
AZURA® Autosampler AS 6.1L analytical HPLC autosampler, 1240 bar, with sample cooling/heating
Article No.: AAA11AA
Show product
AZURA® Autosampler AS 6.1L analytical HPLC autosampler, 345 bar, with biocompatible flow path
Article No.: AAA20AA
Show product
AZURA® Autosampler AS 6.1L analytical HPLC autosampler, 345 bar, with biocompatible flow path and sample cooling/heating
Article No.: AAA21AA
Show product
AZURA® Autosampler AS 6.1L preparative HPLC autosampler, 350 bar
Article No.: AAA40AA
Show product
AZURA® Autosampler AS 6.1L preparative HPLC autosampler, 350 bar, with sample cooling/heating
Article No.: AAA41AA
Show product
KNAUER is known for the quality of its products and has been certified several times. We produce high-tech laboratory instruments for research, routine analysis and production.
See all Quality certificates
In addition, we have extended documentation about all our products, including CE Declarations of Conformity.
See all CE Declarations of conformity
Innovation and quality - since 1962. Made in Germany.
We are happy to help you
Mo – Fr
07:00 – 17:00 CE(S)T
24 / 7
Technical data or prices are subject to change without notice. Prices may vary by country and do not include taxes, customs duties or delivery. All trademarks are the property of their respective owners.Our general terms and conditions apply: www.knauer.net/terms
