-
Verschraubungen für HPLC / UHPLC und FPLC Systeme
Verschraubungen aus Edelstahl für HPLC oder aus PEEK für FPLC und für verschiedenste Gegendruckbereiche
Verschraubungen aus Edelstahl für HPLC oder aus PEEK für FPLC und für verschiedenste Gegendruckbereiche
Das K-Connect-System besteht aus einer Verschraubung, einem Spaltrillen-Klemmring mit geteilter Nut und einer Polymerdichtung. Klemmring und Polymerdichtung werden über die Kapillare "Rücken an Rücken" geschoben, während die Verschraubung alle Teile strafft.
K-Connect fingeright Veschraubungen können optional mit Schraubenschlüsseln weiter angezogen werden, wenn eine höhere Rückdruck beständigkeit erforderlich ist.
| Artikel nummer |
Beschreibung | Material | Für Kapillaren mit äußerem Durchmesser [inch] | Thread | inbegriffener Ring | maximaler Rückdruck [bar] | Anzahl der Verschraubungen im Kit |
|---|---|---|---|---|---|---|---|
| A9646 | K-Connect Fingertight Fitting, long | PEEK | 1/16" | UNF 10/32 | Biconical sealing rings A1022 | n/a | 2 |
| A9646-1 | K-Connect Fingertight Fitting, long | PEEK | 1/16" | UNF 10/32 | Biconical sealing rings A1070 | n/a | 10 |
| A9645 | K-Connect Fingertight Fitting, long | Stainless steel | 1/16" | UNF 10/32 | Split-grooved clamping rings A0484 and polymer Sealing rings A0139 | 1200 | 2 |
| A9645-1 | K-Connect Fingertight Fitting, long | Stainless steel | 1/16" | UNF 10/32 | Split-grooved clamping rings A0484 and polymer Sealing rings A0139 | 1200 | 10 |
| A9647 | K-Connect Standard Fitting | Stainless steel | 1/16" | UNF 10/32 | Stainless steel ferrules A0110 | 1200 | 2 |
| A9647-1 | K-Connect Standard Fitting | Stainless steel | 1/16" | UNF 10/32 | Stainless steel ferrules A0110 | 1200 | 10 |
The DYNASEAL connecting system connects capillaries made out of stainless steel and PEEK, as well as PTFE and Tefzel tubings with low dead volumes. It allows maintenance-free operation and provides a long life. Suitable for UNF-threads of type 10/32.
The system consists of a bushing, a split-grooved clamping ring (3), and a polymer sealing (4). The split-grooved clamping ring and polymer sealing are slipped over the capillary (2) "back to back", while the bushing (1) tightens all parts when installed to the connecting part (5) and pushed gently to the stop position in connecting part (6). Thus, leak-free operation is made possible.
DYNASEAL connections are pressure stable up to 450 bar.
DYNASEAL can be optionally used with double-cone sealings made out of PEEK. In this case, pressure stability is accordingly reduced to 150 bar.
DYNASEAL is adaptable in new conditions such as variable bore depths or detector connections because it is mobile and reusable.
| Article number | Description | Material | For capillary outer diameter [inch] | Thread | Included ferrules | Maximum backpressure [bar] | Amount of fittings in set |
|---|---|---|---|---|---|---|---|
| A0108 | Dynaseal bushings, short | Stainless steel | 1/16" | UNF 10/32 | Split-grooved clamping rings A0484 and polymer Sealing rings A0139 | 450 | 4 |
| A1021 | Dynaseal bushings, short | Stainless steel | 1/16" | UNF 10/32 | without ferrules | depends on ferrule | 10 |
| A0181 | Dynaseal bushings, long | Stainless steel | 1/16" | UNF 10/32 | Split-grooved clamping rings A0484 and polymer Sealing rings A0139 | 450 | 3 |
| A1064 | Dynaseal bushings, long | Stainless steel | 1/16" | UNF 10/32 | without ferrules | depends on ferrule | 5 |
| A1020 | Dynaseal bushings, short | Stainless steel | 1/16" | UNF 10/32 | Biconical sealing rings A1022 | 150 | 10 |
| A1069 | Dynaseal bushings, long | Stainless steel | 1/16" | UNF 10/32 | Biconical sealing rings A1022 | 150 | 5 |
| A0736 | Dynaseal bushings, long | Stainless steel | 1/8" | M8x1 | Split-grooved clamping rings A1239 and polymer Sealing rings A0232 | n/a | 4 |
| A0735 | Dynaseal bushings, long | Stainless steel | 1/8" | M8x1 | without ferrules | depends on ferrule | 4 |
| A0644 | Dynaseal bushings, short | Stainless steel | 1/8" | M8x1 | Split-grooved clamping rings A1239 and polymer Sealing rings A0232 | n/a | 4 |
| A1201 | Dynaseal bushings, long, hex head | Stainless steel | 1/8" | M8x1 | without ferrules | depends on ferrule | 4 |
| A1201-1 | Dynaseal bushings, long, hex head | PEEK | 1/8" | M8x1 | without ferrules | depends on ferrule | 4 |
| Article number | Description | Material | For capillary outer diameter [inch] | Thread | Included ferrules | Maximum backpressure [bar] with stainless steel ferrule | Amount of fittings in set |
|---|---|---|---|---|---|---|---|
| A0112 | Bushings short, wrench caliber 1/4" | Stainless steel | 1/16" | UNF 10/32 | without ferrules | 1200 | 10 |
| A0113 | Bushings short, wrench caliber 1/4" | Stainless steel | 1/16" | UNF 10/32 | without ferrules | 1200 | 25 |
| A0115 | Bushings long, wrench caliber 1/4" | Stainless steel | 1/16" | UNF 10/32 | without ferrules | 1200 | 3 |
| A0116 | Bushings long, wrench caliber 1/4" | Stainless steel | 1/16" | UNF 10/32 | without ferrules | 1200 | 10 |
| A0830 | Bushings, wrench caliber 10 | Stainless steel | 1/8" | M8x1 | without ferrules | n/a | 10 |
| Article number | Description | Material | For capillary outer diameter [inch] | Thread | Included ferrules | Maximum backpressure [bar] | Amount of fittings in set |
|---|---|---|---|---|---|---|---|
| A0141 | Bushings knurled, short | Polymer | 1/16" | UNF 10/32 | without ferrules | depends on ferrule | 10 |
| A0142 | Bushings knurled, short | Polymer | 1/16" | UNF 10/32 | without ferrules | depends on ferrule | 30 |
| A0144 | Bushings knurled, long | Polymer | 1/16" | UNF 10/32 | without ferrules | depends on ferrule | 10 |
| A0145 | Bushings with integrated sealing cone, knurled, short | Polymer | 1/16" | UNF 10/32 | integrated sealing cone | n/a | 10 |
| A0584 | Bushings with integrated sealing cone, knurled, short | PEEK | 1/16" | UNF 10/32 | integrated sealing cone | n/a | 10 |
| A0733 | Bushings with integrated sealing cone, knurled, short | Polymer | 1/8" | M8x1 | integrated sealing cone | n/a | 10 |
| A2501 | Bushings with integrated sealing cone, short hex-head | PEEK | 1/16" | UNF 10/32 | integrated sealing cone | 350 | 1 |
| A25011 | Bushings with integrated sealing cone, short hex-head | PEEK | 1/16" | UNF 10/32 | integrated sealing cone | 350 | 5 |
| A2502 | Bushings with integrated sealing cone, long hex-head | PEEK | 1/16" | UNF 10/32 | integrated sealing cone | 350 | 1 |
| A25021 | Bushings with integrated sealing cone, long hex-head | PEEK | 1/16" | UNF 10/32 | integrated sealing cone | 350 | 5 |
| Article number | Description | Material | For capillary outer diameter [inch] | Thread | Included ferrules | Amount of fittings in set |
|---|---|---|---|---|---|---|
| A5829 | Bushings flat bottom, super flangeless | PEEK | 1/8" | 1/4-28 | without ferrules | 10 |
| A58291 | Bushings flat bottom, super flangeless | PEEK | 1/16" | 1/4-28 | without ferrules | 10 |
| A58292 | Ferrules for super flangeless fittings, with lock ring | PEEK/Stainless steel | 1/16" | 10 | ||
| A58292-1 | Ferrules for super flangeless fittings, with lock ring | ETFE/Stainless steel | 1/16" | 1 | ||
| A58293 | Ferrules for super flangeless fittings, with lock ring | black PEEK/Stainless steel | 1/8" | 10 | ||
| A58294 | Ferrules for super flangeless fittings, with lock ring | ETFE/Stainless steel | 1/8" | 10 | ||
| A58294-1 | Ferrules for super flangeless fittings, with lock ring | PEEK/Stainless steel | 1/8" | 1 | ||
| A5829A | Blind fitting flat bottom | Delrin | 1/4-28 | 1 |
Or just more information about our products?
Please send us your request.
We are happy to answer your questions about our products and services.
Monday to Friday
7 am- 5 pm CET
Available for you anytime
